FREQUENTLY ASKED QUESTIONSFAQ
DO ASK, WE'RE HERE FOR YOUEvery question answered
All electricians and electrical contractors must be licensed to work in Western Australia. Our electricians hold current electrical workers licences.
Under the Electricity (Licensing) Regulations 1991, electrical work must be performed by people with licences issued by the Electrical Licensing Board. Some types of work are exempted from these regulations.
A licensing system ensures only qualified electricians are employed by electrical contractors.
A safety certificate is provided on completion of all electrical work as required by Energy Safety. Preliminary Notices and Notices of Completion are submitted to Western Power on completion of jobs requiring this notification.
A 12 month warranty applies to all labour. Parts are covered by the manufacturer’s warranty and repair/replacement is made at the manufacturer’s discretion.
Safe installations are performed by competent people to appropriate industry standards.
Electrical Contractors must certify the work is safe and complies with regulations before supply is connected. Certifications can be independently validated for authenticity with Energy Safety.
If completed correctly, modern electrical installations will remain safe for the installation’s expected life.
Older appliances may be more volatile and safety concerns such as electric shocks must be reported to your electrical supplier as soon as you notice them.
For more information go to www.westernpower.com.au
As of 1 July 2008, all electrical contractors must supply an electrical safety certificate within 28 days of their service.
This certificate guarantees your work was safely performed by licensed electrical contractors and complies with regulation standards.
Certificates are issued for all electrical installations (excluding repairs) completed on residential, commercial, industrial and institutional premises.
No matter how small your job is, we recommend you request a certificate for your records.
For more information go to www.commerce.wa.gov.au
Smoke alarms are an essential safety device for your home.
In 2009 it became compulsory for all houses, units etc being sold or rented to have smoke alarms fitted. Mains powered smoke alarms are wired into your house’s electrical system and have to be installed by a licensed electrical contractor.
All smoke alarms have a recognised service life of 10 years before they become unreliable. Smoke alarms therefore need to be changed every 10 years. For safety reasons, smoke alarms are fitted with a battery back-up. When the battery requires replacing, a warning beep will sound every 60 seconds for a minimum of 7 days.
How do I know if they are working? All smoke alarms are fitted with a test switch and FESA recommends all units should be tested monthly
If the smoke alarm needs to be fitted to a position where cables cannot be installed a smoke alarm powered by a 10 year life battery that cannot be removed from the alarm should be used.
Designed to be highly sensitive, smoke alarms sound a warning alarm when smoke is detected in the home. Due to their sensitivity, smoke alarms may detect smoke and moisture created by common household activities.
Smoke alarms must be regularly tested to ensure the alarm and batteries operate effectively. We recommend testing once a month as well as cleaning your alarm with a vacuum cleaner annually.
For more information see www.dfes.wa.gov.au (Department of Fire & Emergency Services)
WHAT ABOUT YOUR PROJECT?Project related questions
Most invoices will be sent to you via email. The following payment methods are accepted:
- Cash
- Cheque
- Bank transfer
Payment is expected on the day of completion if the invoice is issued at time of completion of the work. If the invoice is emailed to you, then the account must be settled upon receipt of the invoice.
RCDs are safety devices designed to prevent death by electric shock. These devices monitor the flow of electricity within a circuit. If the amount of electricity flowing into a circuit exceeds the amount leaving, the RCD automatically cuts the electricity supply within 10 to 50 milliseconds of detection.
An RCD is a life-saving investment for your family. To effectively reduce the risk of electric shock, RCD’s should be fitted to all power points and lighting circuits in your home. To reduce incidents of electric shock, the Western Australian Government changed RCD regulations in August 2009. The legislation demands every sold or leased home be fitted with a minimum of two RCDs, which must protect all power points and lighting circuits.
To ensure that the RCD functions correctly, the test button must be pressed every three months. Pushing the test button simulates an earth leakage fault and indicates if the device operates correctly. Electrical clocks and timing devices may need to be reset after the test button has been pushed and the RCD turned back on.
For more information www.commerce.wa.gov.au
For electrical work, we use Clipsal products whenever possible. Clipsal is a long established Australian owned company. With a 5 year warranty and in-house warranty on the majority of their products, this premier brand is a superior quality product.
For other products, we endeavour to use reputable, Australian made/owned products.
For appliance repairs we use the manufacturer’s original parts whenever possible.
Our office is attended from 7.00am to 6.30pm Monday to Friday. If calling between these times, occasionally the call will be diverted to voicemail. Please leave a message and your call will be returned as soon as possible.
Appointments are booked with a 2 hour window given between 7.30am and 4pm. If more convenient, a call can be placed to notify you when the tradesperson is on his way.
Let’s work together
Our fully licenced Electricians will provide superior quality electrical installations and electrical repairs to homes and commercial sites across Perth.
Providing electrical services to Perth’s northern suburbs including Innaloo, Karrinyup , Scarborough , Stirling , Osborne Park , Wembley and all other metro areas.